Driveway Overlay Services in Sacramento, CA
Six Reasons Customers Hire Us Over Other Companies
- We Only Work With Sacramento Concrete Our crew has poured, repaired, and resurfaced concrete across Sacramento for years. We understand the clay soil, the summer heat, and the winter rain. This means that we pick materials that hold up to local conditions rather than just standard products.
- You Deal With Our Team From Start to Finish We do not pass your job to a subcontractor. Our own licensed crew handles every step. This gives you one point of contact and one standard of work across the whole project.
- Every Quote Is Written Down We put the full price in writing before a single bag of concrete opens. What you approve is what you pay. No added fees show up on the invoice after the job is done.
- We Back Our Work Every overlay we install comes with a written warranty against peeling and delamination. If the surface separates or lifts within the warranty period, we return and fix it at no charge to you.
- We Are Licensed and Insured We carry a valid California contractor license and full liability insurance. This protects your property during the work. It also means you are not responsible if something goes wrong on site.
- Cleanup Is Part of the Job We treat your driveway, yard, and garage as our own. We sweep, blow off dust, and rinse the work area before we leave. You will not find leftover concrete or trash when we are done.
What Each Overlay Type Does for Your Driveway
Plain Gray Concrete Overlay
A plain gray overlay is the most affordable way to refresh an old driveway. It covers oil stains, tire marks, and surface pitting with a clean coat of new concrete. The result looks like a freshly poured slab. This is a smart choice if your driveway is structurally sound but looks tired and worn.
We start by stripping any old sealers or loose material off the surface. We use a ride on self propelled concrete floor scraper with a 12 inch steel blade to clear the surface down to bare concrete. Next, we apply a polymer modified cementitious resurfacer across the full slab at a uniform thickness. This material bonds tightly to the old concrete. This process follows California Green Building Standards Code Section 5.504.4.3 for low VOC adhesives and sealants. This code keeps harmful fumes out of the air during and after installation.
Brushed Grip Overlay for Sloped Driveways
A brushed grip overlay is the right choice for driveways that slope toward the street. Rain and morning dew make sloped concrete very slippery. A brushed finish creates small ridges across the surface. These ridges give tires and shoes something to grip. This means that your family can walk and drive safely even in wet weather.
We apply a thick coat of concrete to the slab. Next, we drag a concrete texturing broom with a 36 inch medium stiffness nylon bristles block across the wet surface in one direction. This pulls the ridges into the concrete before it sets. We use a high strength polymer modified concrete resurfacer as the overlay base material. This material holds the texture firmly and does not wear smooth under heavy traffic. This work meets City of Sacramento Standard Construction Specifications Section 27.13 for concrete driveway brushed texture finish. This city standard sets the minimum depth and spacing of the brushed grooves.
Colored Surface Overlay
A colored overlay lets you change the look of your driveway completely. You can choose from warm sand, charcoal, terra cotta, or custom blended shades. The pigment mixes directly into the concrete. This means that the color goes all the way through the layer and will not scratch off the top.
We test every batch before we pour it. We use a digital colorimeter spectrophotometer color checking device to measure the exact shade against your chosen sample. This prevents any mismatch between batches. Next, we blend integrally colored iron oxide pigment powder into the overlay compound at the correct ratio. Iron oxide pigments hold their color under intense UV light. This process complies with Sacramento Metropolitan Air Quality Management District Rule 442 for architectural coatings VOC limits. This rule limits the amount of chemical compounds released into Sacramento's air during and after installation.
Flat Finish Troweled Overlay
A flat troweled overlay gives the driveway a smooth, clean surface. This style works well on modern homes with simple lines and minimal detail. The surface feels polished and even. Also, it reflects light in a way that makes the entry look open and fresh.
We use a walking concrete pool trowel with a round end blue steel blade to spread and smooth the overlay compound in long, even passes. This tool gives us a flat surface without ridges or trowel marks. Next, we apply a fine sand cementitious microtopping overlay compound as the final wear layer. This compound is very thin but bonds firmly. This installation satisfies California Building Code Section 11B 302.1 for ADA compliant slip resistant ground surfaces. This means that even a smooth surface must pass a grip test for wet traction. We make sure it does.
Patterned and Stamped Concrete Overlay
A stamped overlay adds the look of natural stone, brick, or slate to a plain concrete driveway. You pick the pattern. We press it into the wet overlay before it sets. This means that your driveway looks like expensive stonework without the cost of real stone. This service is popular in neighborhoods with craftsman homes and detailed landscaping.
We prepare the slab edges first so the pattern lines up correctly. We use a handheld electric surface grinding machine with a 7 inch diamond cup wheel to grind down raised edges and rough joints. Next, we spread an acrylic polymer modified cementitious stampable overlay mix across the slab. We press the stamp pattern firmly into the wet mix. This work follows California Building Code Section 1904.2 for concrete durability under sulfate soil exposure. Sacramento soil contains salts that can break down low quality concrete. This code makes sure the overlay stays strong despite those soil conditions.
Six Steps From Empty Ground to Finished Driveway
Step 1
We visit your property for a free inspection. We check the slab for cracks, sunken panels, and soil problems.
Step 2
We walk you through the overlay options that fit your driveway condition and budget.
Step 3
We clean the old slab and remove any loose material, old sealer, or grease spots.
Step 4
We fill cracks and grind down any raised joints so the surface is flat.
Step 5
We apply the primer coat, then spread the overlay at the correct thickness. We add your chosen texture or stamp pattern before the concrete sets.
Step 6
We apply a weather resistant top sealer. This sealer blocks UV rays, locks in the color, and stops water from entering the new layer.